Every Easter we eat dinner at my parents house.  One of our favorites is our Easter ham!  But this year, due to my Dads sodium restrictions, the entire leftover ham came home with me.  Not complaining y’all.  Ham is my jam (see what I did there).  I knew that we’d never eat the entire ham before is started to turn, so I decided to can the leftovers.  I have big plans of some ham pot pie this summer with it.

This is the time of year to stock up on ham. This week, pre-Easter prices are still available, you can get nice hams for as cheap as 87 cents per pound.  And who can pass up a good sale like that?

Canning ham is NOT difficult in any way and when done correctly, it is completely safe.  It absolutely requires you to use a pressure canner.  Read that again.  You must use a pressure canner.  If this is your first time using a pressure canner, you may want to check out my detailed instructions here.

The first thing we want to do is cut all the ham off the bone.  I cut mine into fairly larger chunks, so it didn’t fall apart during the canning process.  You can also freeze the bone for some ham and bean soup in your future.  Set your ham aside while you get everything else ready.

Once I had all the ham chunked up it was time to start filling the jars.  Fill your hot sterilized jars with the cut meat.  I packed it in really well, getting as much as I could in there while still leaving 1″ headroom.  If you aren’t sure how to keep your jars hot, you can always run them through a cycle in the dishwasher.  That’s normally what I do when I know I’m going to be canning that day.

Next you need to add liquid in with your ham.  You can either pour boiling water over the meat or, if you’re as lucky as I was, your Mama saved you all the ham broth!  I brought the broth to a boil on my stove and ladeled it over top of the ham, again leaving a 1 inch head space.  I had enough of that precious broth left to do a quart of it as well.  That broth will be a nice addition to my ham and beans that I make with that fabulous ham bone!

Make sure you wipe the rims of your jars before putting your hot lids and rings on them.  I wiped the jar rims with a cloth with a little vinegar to help remove any of the greasy residue.

Now it’s time to process!  Place the jars into the canner base making sure that there is space between them.  Make sure you remember to add your hot water in your canner.  Check your manual to see what your canner calls for, my canner requires 3 quarts of water.  Put your lid in place.  I highly suggest setting a timer so you know when the specified time is up.

Processing times are:

75 minutes  at 11 lbs for pint jars

90 minutes at 11 lbs for quart jars

Make sure to read your manual as additional pressure is needed for high altitude, over 2000 feet.

When your timer goes off, turn the stove off.  Actually, turn the stove off and walk away.  Go take a much deserved seat for a while.  You HAVE to leave the lid on and allow the pressure canner to return to normal pressure.  I just let mine sit for quite a while.  Once the pressure is down to normal you can remove the lid and take your jars out.  I use the jar lifter to remove them.  And I always set them on a kitchen towel then cover them with another towel.  I don’t want them to cool down too quickly.

Besides the benefit of stocking up on ham when it is very cheap, having canned ham and stock on the shelf is a HUGE convenience.  I can grab a can and have my ham pot pie halfway done, all I need to add is some potatoes and pot pie dough.  I’m thinking that will be a future blog post!

Now sit back, relax with a cool drink and listen for the sound of the PING of a successfully sealed jar!  A beautiful sound!

The USDA estimates that Americans throw away about 200 million pounds of turkey meat after their Thanksgiving meal.  Y’all, I had to read that twice.  200 million pounds?  The thought of eating turkey every single day following Thanksgiving is exhausting.  Not to mention sometimes there is so much left that there isn’t any possible way to eat it all before it goes bad.  The solution?  Canning it to use throughout the year in so many different ways.  Turkey noodle soup, turkey noodle casserole, turkey and dumplings, turkey pot pie…I could go on and on.

In a past post, I’ve showed you how to can chicken by using the raw pack method.  This is where the chicken cooks during the processing.  I’ve also showed you how to can your own chicken broth.  Today I’m going to show you how to can meat that has already been cooked.

First things first, you need to make your broth.  We need broth because we will be adding it in the jars with the meat.

First gather your ingredients.  You’ll need onions, celery, garlic, carrots, salt and pepper.

I already had a container in my freezer I had been saving to make chicken broth.  On Thanksgiving, I saved the entire carcass along with the skin, neck, giblets and any other pieces I could use to make broth.  I put everything in a large stock pot, all the chicken and turkey pieces.  I figured mixing the two together would just give me a more complex, rich broth.  Don’t worry about dicing or making your veggies pretty.  I just quarter the onion, cut the celery and carrots in half and let the garlic cloves whole.  Cover everything with water.  I put enough water so everything is covered by at least 3 inches on top.

Bring the whole thing to a boil, and then turn it down to a simmer.  It takes a minimum of 3 hours to turn bones into broth but I like to let mine go a lot longer than that.  The longer it reduces, the richer your broth will be.  The last time mine cooked for about 12 hours.  I’m not going to tell you to taste it to see if it’s done.  If you’ve cooked it for longer than 3 hours, it’s done.  Although I highly recommend letting it cook for longer than that.  At this point it’s probably more of a chicken stock. A more reduced, darker, stronger, thicker version of broth.  And amazingly yummy in recipes!

After you’ve simmered the broth down, you’ll need to dip it out and strain it through a colander.  I use a small sauce pot to dip it out into a colander on top of a pitcher.  That allows me to easily pour the broth once it’s strained.  If you’re using a bowl, you’ll probably need a few bowls.  You don’t realize just how much broth you made until you get to this point.  You can also strain it a second time through cheesecloth to get those small bits that the colander let through.

Once you have the broth strained stick it in the fridge overnight to allow the fat to rise and solidify at the top.  I’m going to be honest here, I don’t skim the fat off of mine.  There really isn’t that much fat plus the fat gives it more flavor, at least in my mind it does.  If you do want to skim the fat off, just take it out of the fridge the next morning and remove the hardened fat with a spoon.

Now let’s get on to canning!

Start with clean, sterilized jars.  I run my jars through a cycle in the dishwasher to sterilize them.  Being that my turkey was in the fridge and is cold when I pack it in, I don’t keep the jars hot.  I don’t want to take the chance of having broken jars in the canner.  We all know what happens when you mix hot and cold.

I started by cutting the turkey into chunks.  Once I would get a handful chunked, I would pack it into my jars.  For this, I used half-pint jars.  I could fit about 3.5 – 4 ounces in each jar.  If you are using pint jars, you could fit around 7 – 8 ounces.  I fill the jars about half-way, then push it down and make sure all the nooks and crannies are filled in.  Then pack more turkey chunks in on top.

Make sure you have 1 1/4″ headspace between the turkey and the rim of your jar.  I have learned not to fill the jars exactly 1 1/4″ from the top.  I stop at maybe 1 1/2″ or so.  I noticed that some of the juices come out of the jar during processing.  If you under-pack the jar just a smidge it takes care of that problem.  In canning, headspace is the amount of space you leave between the rim of the jar and whatever you’re filling it with.  Each thing requires a different headspace.  I have a funnel that also has markings on the side to measure headspace.  Here is a little headspace chart to follow:

• Leave 1-inch headspace for low-acid foods, vegetables and meats.
• Leave 1/2-inch headspace for high-acid foods, fruits and tomatoes.
• Leave 1/4-inch headspace for juicers, jams, jellies, pickles, and relishes.

Once the meat is packed in the jar, I added some of the broth I had just made.  I filled the jar with broth, making sure to cover the meat but leave the proper amount of headspace.  I use a Prepworks by Progressive Canning Funnel.  I absolutely love that it has headspace measurements on the side and that it fits regular and wide mouth jars.

I also had quite a bit of broth leftover after filling the jars, so I went ahead and got it ready to can as well.

Wipe the rim of the jar off.  Never forget this step!  Even when you’re using a funnel, you are bound to get something on the rim.  And if the rim isn’t clean, it won’t seal properly.

Put your lids and rings on the jars.

Since my jars were “cold packed”, I didn’t prep my pressure canner ahead of time.  Being that my jars were still cold from putting the turkey and broth in them, I wanted to prevent my jars from breaking once the canning process started.  I put 3 quarts of hot tap-water in the pressure canner and sat my jars down in.  I gave them enough time to warm up a bit from the water before I even turned the burner on.  Make sure to read your directions for your specific canner to see how much water they advise.  Also, a little tip, to keep your jars from being “spotty” you’ll want to add 2 tablespoons of white vinegar to the water.

The first thing you need to do is vent your canner.  Venting means getting rid of the steam inside the canner so you can build up pressure.  To vent, you put your lid on and make sure it’s sealed  (follow the manufacturers instructions for this as well) and turn the heat up to medium or medium/high.  You DO NOT want your weight on yet.  When steam is steadily coming out of the vent, set your timer for 10 minutes.  Once the timer goes off, you’re ready for the next step.

Put your weight on the canner, being careful of the steam that’s coming out, and wait for it to come to pressure.  Once it’s up to pressure, set your timer for the appropriate time below.  Remember to only start the timer once your canner is up to pressure.  Waiting for the canner to get up to pressure sometimes takes several minutes, and it will feel like time stands still.  Just be patient, it will get there.

75 minutes at 15 lbs for pint jars (if you are under 1,000 ft. altitude, use 10 lbs)
90 minutes at 15 lbs for quart jars (if you are under 1,000 ft. altitude, use 10 lbs)

You may need to adjust the heat up or down during this time.  If you see your pressure rising above what it should be, reduce the heat.  If you see it falling below what it should be, raise your heat.  I normally don’t leave my kitchen while I’m pressure canning, just so I can keep a close watchful eye on the pressure.

Pressure Canner – Presto 01781 23-Quart Pressure Canner and Cooker

Funnel – Prepworks by Progressive Canning Funnel for Regular and Wide Mouth Jars

Ladel – Prepworks by Progressive Canning Scoop
Jar Lifter –Prepworks by Progressive One Handed Canning Jar Lifter

Ball Blue Book – Ball Blue Book Guide To Preserving, 37Th Edition

Pressure Canning Cookbook – My All American® Pressure Canner Cookbook: 120 Foolproof and Fun Recipes for Home Preserving